NEWS
Technical guide for charcoal
burning tunnel
We share this experience for beginners or are looking
for wood-burning coal tunnel techniques to produce quality coal to meet
customer requirements. And we also look forward to the comments from people who
have had experience in the charcoal industry in Vietnam, to build a prestigious
charcoal brand not only in the domestic market but also in the international
market. Here are the steps:
Step 1: Selection of firewood material: must choose
fresh firewood, heavy wood. Cut 50-70cm long, diameter of 5cm or more, if the
diameter is more than 30cm, the car must be double.
Step 2: Raw fuel wood: The ingredients are arranged in
sequence and have a dashboard at the bottom of the oven. The request was tight
and tight to the top of the oven.
Step 3: Burning Furnace:
The first phase: the first few days of the firewood
use dry wood, burning strongly even using electric fans blowing into the
burning to create heat to dry water in the fuel wood, this process lasts 3 to 5
days depending to the technician to get the stove and the burning material.
Intermediate stage: After drying the material, the
smoke in the chimney begins to turn the smell of spicy, until the strong smell
of the pungent begins to close the chimney. / 3 chimneys left about 5cm, this
action is to reduce the exchange of gas to burn the gas to burn in the fire
only smoldering (also for this reason, the brothers in the industry called gas
stove or anaerobic furnace). Note that during this period we do not use dry
wood for gathering, mainly by fresh firewood or firewood with poorly maintained
fire retention and fire integrity but the chambers must always be red 'reed'.
This is also the decisive stage of the success of a batch of coal, if the
strong, strong coal will be light, high fire and coal gas will be heavy weight
and standard. At this stage of observation in the chimney, blackened tar resin
lasts 8 to 10 days
The final stage: the ripening stage of charcoal for 2
to 3 days, at this stage smoke began to move pleasant aroma, smoke sparse and
gradually reduced to only see the heat is mainly. At the dry plastic oil
chimney and start to moss is a sign of coal ripening, at this stage the
technician must test the coal at the hole, if it is ripe close to the bottom,
the last stage is completely closed chimney and combustion chamber with brick
and mud to finish the fire. Note: when the cap should be sealed very carefully,
if the opening gap to open the air gap, the furnace will long off the heat that
can not even extinguish it.
Step 4: Wait for the coal to cool down: the time for
the oven to turn off and gradually to 10-15 days. To ensure the safety when
opening the oven door we have to prepare adequate fire protection equipment to
avoid the case of coal fire. The charcoal must be left in a dry, lined,
sun-sheltered area to ensure that the coal is not damp.
Nhận xét
Đăng nhận xét